Pin16

P0959

Auto Shift Manual Mode Circuit Intermittent

Severity
Low
Driving
No driving restriction

The auto shift manual mode circuit is faulting intermittently. Manual mode works, then briefly does not. Connections and worn contacts are more likely than a failed module.

Possible causes

What you might notice

What to check, in order

  1. Move the selector between modes repeatedly while watching the reported state.
  2. Wiggle-test the connector under the console.
  3. Inspect the selector for spilled drink.
  4. Check the gate mechanism for wear.
  5. Confirm automatic shifting is normal, in which case this is minor.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits