Pin16

P0941

Hydraulic Oil Temperature Sensor Circuit Intermittent

Severity
Medium
Driving
Drivable — book it in

The hydraulic oil temperature signal is dropping out intermittently. The reading is present, briefly absent, then back. Connections are far more likely than the sensor.

Possible causes

What you might notice

What to check, in order

  1. Note whether it happens hot or cold.
  2. Wiggle-test the harness with the live data screen showing temperature.
  3. Inspect the connector for a backed-out pin and for fluid.
  4. Check the fluid level and condition.
  5. Clear the code and see how long it takes to return.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits