Pin16

P0955

Auto Shift Manual Mode Circuit

Severity
Low
Driving
No driving restriction

A fault in the auto shift manual mode circuit - the circuit that tells the module the driver has selected manual mode, as opposed to the individual shift requests. The transmission will stay in automatic mode.

Possible causes

What you might notice

What to check, in order

  1. Watch the mode state on the live data screen while selecting manual mode.
  2. Inspect the selector assembly for spilled drink - console selectors sit under cup holders and this is the most common cause.
  3. Check the wiring between the selector and the module.
  4. Check the selector gate mechanism for wear.
  5. Confirm automatic shifting is normal, in which case this can wait.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits