Pin16

P0954

Auto Shift Manual Control Circuit Intermittent

Severity
Low
Driving
No driving restriction

The auto shift manual control circuit is faulting intermittently. Manual mode works most of the time and occasionally ignores a request. Connections are more likely than the switch.

Possible causes

What you might notice

What to check, in order

  1. Watch the switch state while operating the control repeatedly and looking for a missed response.
  2. Wiggle-test the wiring at the column or console.
  3. Check for horn or airbag faults alongside, which point at the clock spring.
  4. Inspect the connector for a backed-out pin.
  5. Confirm automatic shifting is normal, in which case this is minor.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits