Pin16

P0929

Gear Shift Lock Solenoid Control Circuit Range/Performance

Severity
High
Driving
Drivable — book it in

The gear shift lock solenoid circuit is electrically sound but the lock is not behaving as commanded - slow to release, not releasing, or not locking. Often the solenoid is weak or the mechanism is sticking rather than the circuit being at fault.

Possible causes

What you might notice

What to check, in order

  1. Check the brake switch adjustment and confirm the brake lights work.
  2. Check battery voltage - a weak battery makes a marginal solenoid behave exactly like this.
  3. Inspect the selector assembly for spilled drink, which is the most common mechanical cause.
  4. Test whether the lever will leave park without the brake, and park with the handbrake fully applied if it will.
  5. Locate the manual override release in the handbook before you need it.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits