Pin16

P0889

TCM Power Relay Sense Circuit Range/Performance

Severity
High
Driving
Drive only to a garage

The power relay sense circuit is reporting something implausible - the relay's actual state does not match what the module commanded, or the timing is wrong. Usually the relay contacts are sticking or slow, which is a mechanical failure inside the relay rather than a wiring problem.

Possible causes

What you might notice

What to check, in order

  1. Swap the relay first. Sticking contacts are the most common cause and swapping is the fastest way to confirm it.
  2. Inspect the socket for corrosion and heat damage - a discoloured socket means the relay has been running hot.
  3. Check for high resistance on the sense wire.
  4. Check the fuse box for water ingress.
  5. If the battery drains overnight, this circuit is worth investigating as the cause.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits