Pin16

P0826

Up and Down Shift Switch Circuit

Severity
Low
Driving
No driving restriction

A fault in the combined up-and-down shift switch circuit - the single circuit carrying both manual shift requests on vehicles that wire them together. Automatic shifting is unaffected; manual mode will not respond.

Possible causes

What you might notice

What to check, in order

  1. Watch the switch state on the live data screen while operating it in both directions.
  2. Both directions failing together points at shared wiring or the clock spring rather than at a switch.
  3. Inspect the connector if the column or console has been worked on.
  4. Check for horn or airbag faults alongside, which would confirm a clock spring problem.
  5. Confirm automatic shifting is normal, in which case this can wait.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits