Pin16

P2773

Four Wheel Drive (4WD) Low Switch Circuit Low

Severity
Medium
Driving
Drivable — book it in

The four-wheel drive low range switch signal is stuck low - typically shorted to earth or a stuck switch. The module has no usable indication of whether low range is selected.

Possible causes

What you might notice

What to check, in order

  1. Unplug the switch and check whether the low reading persists at the harness.
  2. Inspect the connector for corrosion and water.
  3. Follow the harness under the vehicle looking for chafe and impact damage.
  4. Check the switch continuity in each position against specification.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits