Pin16

P2759

Torque Converter Clutch Pressure Control Solenoid Control Circuit Electrical

Severity
Medium
Driving
Drivable — book it in

An electrical fault in the torque converter clutch pressure solenoid circuit - an open winding, a short, or resistance outside specification.

Possible causes

What you might notice

What to check, in order

  1. Read all transmission codes together. Several solenoid codes at once point at the case connector, the internal harness or contaminated fluid - not at several failed solenoids.
  2. Pull the transmission case connector and look for fluid inside it. Fluid wicking up the harness corrodes the pins and can reach and destroy the control module itself.
  3. Check the fluid level and condition first. It is the cheapest check and it explains more transmission complaints than every electrical fault combined.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits