Pin16

P2141

Exhaust Gas Recirculation Throttle Control Circuit Low

Severity
Medium
Driving
Drivable — book it in

The EGR throttle control circuit is reading low - typically shorted to earth or open circuit. The module cannot control the EGR throttle plate, so EGR flow control goes with it.

Possible causes

What you might notice

What to check, in order

  1. Disconnect the actuator and check whether the low reading persists at the harness. If it does, the fault is in the wiring.
  2. Inspect the connector for corrosion, water and spread pins.
  3. Measure the actuator winding against specification.
  4. Trace the harness looking for chafe points near hot or moving parts.
  5. Check for related codes - P0487 or P0488 alongside this one usually means the actuator itself, not the wiring.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits