Pin16

P0785

Shift/Timing Solenoid

Severity
High
Driving
Drive only to a garage

A fault in the shift/timing solenoid circuit. This solenoid controls the timing of shifts - how quickly pressure builds as a gear engages - so a fault here tends to show as shifts that are harsh, slow, or overlapping rather than as a gear being missing entirely.

Possible causes

What you might notice

What to check, in order

  1. Check the fluid level and condition first.
  2. Read all transmission codes together - several solenoid codes point at a shared cause.
  3. Inspect the case connector for fluid and corrosion.
  4. Measure the solenoid resistance against specification where accessible.
  5. Check whether an adaptation reset is specified after repair.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits