Engine Oil Pressure Sensor/Switch High Voltage

Possible causes

• CommonLow engine oil level
• CommonFailed oil pressure sensor or switch
• CommonCorroded or oil-contaminated connector at the sensor
• CommonWiring damage - the sensor sits low on a hot engine
• PossibleOil of the wrong grade, or long overdue for changing
• PossibleWorn oil pump, blocked pickup screen or worn bearings

What you might notice

• Oil pressure warning light
• Gauge reading zero or implausibly high
• Ticking or rumbling from the engine
• Check engine light on
• Often no symptom if only the sensor has failed

What to check, in order

1. Unplug the sensor and check whether the high reading persists at the harness. If it does, the fault is in the wiring rather than the sensor.
2. Before concluding it is electrical, confirm the real pressure with a mechanical gauge.
3. Check the oil level first. It costs nothing, it is the most common cause, and it is the one thing you must not skip.
4. Inspect the connector at the sensor for oil contamination - a leaking sensor seal fills its own plug and produces an electrical fault from a mechanical leak.
5. Check the wiring for chafe and heat damage.
6. Confirm the actual pressure with a mechanical gauge before dismissing this as a sensor fault. That measurement is the only thing that separates a lying sensor from a dying engine.