Pin16

P0564

Cruise Control Multi-Function Input "A" Circuit

Severity
Low
Driving
No driving restriction

A fault in the cruise control multi-function input "A" circuit. Several cruise commands usually share one wire, each sending a different voltage, so a single fault here can take out set, resume and cancel together.

Possible causes

What you might notice

What to check, in order

  1. Watch the cruise control switch states on the live data screen while operating each control.
  2. Check the brake and clutch switches. Cruise control will not engage while the module thinks the brake is pressed, so a brake switch fault presents as a cruise control fault.
  3. On steering-wheel controls, suspect the clock spring - horn or airbag faults alongside confirm it.
  4. Inspect the connector if the column or console has been worked on.
  5. Confirm ordinary driving is unaffected, in which case this can wait.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits