Pin16

P0543

Intake Air Heater "A" Circuit Open

Severity
Low
Driving
Drivable — book it in

The intake air heater "A" circuit is open - a broken connection, a blown fusible link, or a failed heater element. The heater is not working at all.

Possible causes

What you might notice

What to check, in order

  1. Check the fusible link first. These carry a very high current and are a common failure point.
  2. Test on a genuinely cold engine. In warm weather a diesel will usually start acceptably without the intake heater, which is why these faults go unnoticed until winter.
  3. Check the fuse or fusible link and the relay - these circuits carry very high current and their connections suffer for it.
  4. Inspect the heater terminals for corrosion and heat damage.
  5. Measure the heater element resistance against specification.
  6. Check for voltage at the heater during a cold start.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits