Pin16

P0184

Fuel Temperature Sensor A Circuit Intermittent

Severity
Low
Driving
Drivable — book it in

The signal from fuel temperature sensor "A" drops out and returns. As with any intermittent electrical fault, the cause is far more likely to be a connection than the sensor itself.

Possible causes

What you might notice

What to check, in order

  1. Wiggle the connector and flex the harness with live data on screen. An intermittent fault that can be reproduced by hand is nearly solved; one that cannot will not be found by guessing.
  2. Open the connector and look for green corrosion, spread terminals or a pin pushed back out of its housing. Spread terminals are common and easy to miss.
  3. Check the sensor's earth. A poor earth produces exactly this pattern and replacing the sensor changes nothing.
  4. Replace the sensor last. Intermittent faults are connections far more often than components, because a component that has failed usually stays failed.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits