Pin16

P0111

Intake Air Temperature Sensor 1 Circuit Range/Performance

Severity
Low
Driving
Drivable — book it in

The intake air temperature reading is implausible in context - not obviously out of range, but inconsistent with the other temperatures the module can see, such as coolant temperature after a cold soak.

Possible causes

What you might notice

What to check, in order

  1. With the engine cold after standing overnight, compare intake air temperature and coolant temperature on the live data screen. They should read close together and close to ambient.
  2. Inspect the connector for corrosion, which adds resistance and shifts the reading.
  3. Check the sensor is correctly located and not touching a hot surface.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits