Pin16

P0114

Intake Air Temperature Sensor 1 Circuit Intermittent

Severity
Low
Driving
Drivable — book it in

The intake air temperature signal is intermittent. As with any intermittent electrical fault, the cause is far more likely to be a connection than the sensor itself.

Possible causes

What you might notice

What to check, in order

  1. Inspect and reseat the connector, looking for corrosion and spread terminals.
  2. Flex the harness near the sensor with the engine running and watch the live reading for drop-outs.
  3. Fix the connection and re-test before replacing the sensor.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits