Pin16

P0316

Engine Misfire Detected on Startup (First 1000 Revolutions)

Severity
Medium
Driving
Drivable — book it in

A misfire was detected during the first moments after starting - within roughly the first thousand engine revolutions. Faults that only appear on a cold start often disappear once the engine warms, which makes them easy to dismiss, but the module logs them because they point at something real.

Possible causes

What you might notice

What to check, in order

  1. Note whether the roughness only happens on a cold start. That pattern is the main clue and worth recording before you change anything.
  2. Inspect the spark plugs - cold-start-only misfires often come from plugs near the end of their life.
  3. Check for a fuel smell at start-up, which suggests an injector leaking down overnight.
  4. If the engine has high mileage and cranks unevenly, a compression test is worth doing.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits