Pin16

P2644

Torque Management Feedback Signal "B" High

Severity
Medium
Driving
Drivable — book it in

Torque management feedback signal "B" is reading high - typically shorted to voltage or with a lost earth.

Possible causes

What you might notice

What to check, in order

  1. Read all codes across every module the tool can reach. Torque management is a conversation between modules, so the fault is often in the module at the other end.
  2. Check battery voltage and state of charge - a weak battery causes module communication faults with no wiring problem at all.
  3. Inspect the connectors at both modules.
  4. Ask whether a module was recently replaced or updated. A software mismatch produces exactly this and no amount of wiring diagnosis will find it.
  5. Check the wiring between the modules for damage.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits