Pin16

P0439

Catalyst Heater Control Circuit (Bank 2)

Severity
Low
Driving
Drivable — book it in

A fault in the catalyst heater control circuit on bank 2. This heater brings the converter up to working temperature quickly after a cold start, when a petrol engine produces most of its emissions. The engine runs normally without it; what suffers is the first minute of every journey.

Possible causes

What you might notice

What to check, in order

  1. Check the fuse and relay for the circuit.
  2. Inspect the heater connections for corrosion and heat damage.
  3. Measure the heater element resistance against specification.
  4. Check the wiring between the module and the heater.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits