Pin16

P0436

Catalyst Temperature Sensor Range/Performance (Bank 2)

Severity
Medium
Driving
Drivable — book it in

The catalyst temperature sensor on bank 2 is answering, but the value is not plausible - it does not rise as the exhaust heats, or disagrees with the other sensors.

Possible causes

What you might notice

What to check, in order

  1. Compare the reported temperature with ambient on a vehicle that has stood overnight - they should be close.
  2. Inspect the connector for corrosion and heat damage. These connectors live in the worst environment on the vehicle.
  3. Check the wiring where it runs along the exhaust.
  4. Check the reference voltage and earth at the sensor.
  5. Expect the sensor to be seized in the exhaust boss - penetrating oil and patience beat force.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits