Pin16

P2542

Low Pressure Fuel System Sensor Circuit High

Severity
High
Driving
Drive only to a garage

The low pressure fuel signal is reading high - typically shorted to voltage or with a lost earth, though a restriction downstream will genuinely raise pressure.

Possible causes

What you might notice

What to check, in order

  1. Check the fuel filter and when it was last changed. It is the cheapest thing here and a very common cause.
  2. Compare the reported low-side pressure with specification at idle and under load.
  3. Note when the symptom appears. A fault that only shows under load or at high speed is the classic signature of a supply that cannot keep up.
  4. Inspect the connector for corrosion and fuel contamination.
  5. Look for air leaks on the suction side - air drawn into the fuel makes pressure erratic and is easy to miss.

Read this code from your own car

Plug an ELM327 adapter into the OBD-II port under the dashboard. Pin16 reads every stored, pending and permanent code, explains each one like this page does — offline, with no account — and shows what the car recorded when the fault was set.

Get Pin16 on Google Play

Where this code sits